Installing ECHealth

Installing ECHealth

The instructions outlined below are for first time installs only. If you are updating ECHealth to a newer version please refer to the article Updating ECHealth.

Requirements
Instructions
  1. Download the latest version of ECHealth and extract the files.

  2. Open the newly extracted folder and double click on the setup.exe file to open the Setup Wizard and begin the installation procedure. Follow the steps presented in the Setup Wizard to install ECHealth.

  3. Place the 'ecal.lic' file inside the newly created folder C:\Lionstar.

  4. Connect power to the ECAL and then use the supplied USB cable to connect the ECAL to the PC. Turn on the ECAL using the switch at the back and Windows will automatically begin installing the required drivers.
    • If Windows does not automatically install the ECAL drivers, first ensure the PC is connected to the internet.
    • If the PC is connected to the internet and you are on a corporate network, contact your network administrator or IT support, as automatic driver installation may have been disabled.
    • Finally, the ECAL drivers can be installed manually.

  5. Once the drivers have finished installing, open ECHealth. You will see a window telling you the serial number of the ECAL connected to the PC. Click OK.



  6. You will then be presented with a window where you will set the passwords for both the User and Admin modes. Click OK once they are set.


    • Related Articles

    • Updating ECHealth

      This article assumes that an older version of ECHealth is currently installed on the PC. If this is a first time install please refer to the following article Installing ECHealth. Requirements The latest version of ECHealth (download here - Build ...

    • ECHealth window contents are overflowing the window container.

      Note: This should only be an issue when operating ECHealth on a PC running Windows 7, if you are experiencing the issue on Windows 8.1 or 10 please submit a support ticket. Problem ECHealth contents do not fit inside the containing window, as seen in ...

    • How to manually install the ECAL driver

      While under most circumstances Windows will automatically and silently install the necessary drivers for ECAL when it is first connected, there are some situations where manual installation of the drivers will be required. Such situations occur if: ...

    • Uninstalling ECHealth

      Requirements PC with ECHealth installed Administrative rights on the PC Instructions It is recommended that you back up the contents of the folder C:\Lionstar before continuing. To do so, simply copy the files 'ecal.dat' and 'ecal.lic' to another ...

    • Where can I find the ECHealth Version Number?

      To find the Version Number of the current ECHealth installed on your PC click on the Help button in the top right of the ECHealth window. The Version Number can be seen in the About page that opens, e.g. in the image below the Version Number can be ...